|
 photo contest! |
ordering |
contact us |
Feeney Architectural Products |
Feeney Gateway |
Return Customer Log-In
|
|
|
Sleekline Ball End Turnbuckle
Inserts through drill holes (or slots) in end post and attaches
with small screw-on ball. Ball pivots to allow angled connections
without beveled washers. Typically paired with
Fixed Ball End or another
Sleekline Ball End Turnbuckle.
Sleekline turnbuckles are best suited for attaching to the cable in the field using the CableCrimp™ style fittings and a CableCrimp™ Crimper tool. See Sleekline_Install.pdf for instructions to assemble the Sleekline series of fittings.
| |
Retail Prices (01/01/08) |
|
| 3345 |
M |
1/8" |
5/8" |
3-3/8" |
1/4" |
8-1/8" (9-3/4") |
5/16" |
$39.38 |
$6.25 |
|
| 3346 |
M |
3/16" |
5/8" |
3-3/8" |
1/4" |
8-1/8" (9-3/4") |
5/16" |
$39.90 |
$6.25 |
|
| 3350 |
C |
1/8" |
5/8" |
3-3/8" |
1/4" |
8-1/8" (9-3/4") |
5/16" |
$40.43 |
N/A |
|
| 3351 |
C |
3/16" |
5/8" |
3-3/8" |
1/4" |
8-1/8" (9-3/4") |
5/16" |
$40.95 |
N/A |
|
| |
Contractor discounts available |
M=Machine Swage,
C=CableCrimp™ Hand Swage
*Ball can be slightly recessed into
the post by counterboring with a 9/16" drill.
DrillØ is the recommended drill
hole size for attaching fittings to end termination posts. Drill hole diameters for the
intermediate posts may be different than the fitting termination posts; so,
please call our sales department at 1-800/888-2418 to confirm proper hole sizes.
Also see the Recommended Drill Hole Charts.
|
|
|
