print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Fittings : Sleekline Ball End Turnbuckle

Sleekline Ball End Turnbuckle


Inserts through drill holes (or slots) in end post and attaches with small screw-on ball. Ball pivots to allow angled connections without beveled washers. Typically paired with Fixed Ball End or another Sleekline Ball End Turnbuckle.

Sleekline turnbuckles are best suited for attaching to the cable in the field using the CableCrimp™ style fittings and a CableCrimp™ Crimper tool. See Sleekline_Install.pdf for instructions to assemble the Sleekline series of fittings.

Sleekline Ball End Turnbuckle
  Retail Prices (01/01/08)  
Part# Swage CableØ DØ A close SØ L close (open) *DrillØ $/Fitting $/Swage M  
3345 M 1/8" 5/8" 3-3/8" 1/4" 8-1/8" (9-3/4") 5/16" $39.38 $6.25  
3346 M 3/16" 5/8" 3-3/8" 1/4" 8-1/8" (9-3/4") 5/16" $39.90 $6.25  
3350 C 1/8" 5/8" 3-3/8" 1/4" 8-1/8" (9-3/4") 5/16" $40.43 N/A  
3351 C 3/16" 5/8" 3-3/8" 1/4" 8-1/8" (9-3/4") 5/16" $40.95 N/A  
  Contractor discounts available
M=Machine Swage, C=CableCrimp™ Hand Swage

*Ball can be slightly recessed into the post by counterboring with a 9/16" drill.

DrillØ is the recommended drill hole size for attaching fittings to end termination posts. Drill hole diameters for the intermediate posts may be different than the fitting termination posts; so, please call our sales department at 1-800/888-2418 to confirm proper hole sizes. Also see the Recommended Drill Hole Charts.