print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Fittings : Ball End Turnbuckle

Ball End Turnbuckle


Inserts through drill holes (or slots) in end post and attaches with small screw-on ball. Ball pivots to allow angled connections without beveled washers. Typically paired with Fixed Ball End or another Ball End Turnbuckle.
Ball End Turnbuckle
  Retail Prices (01/01/08)  
Part# Swage CableØ Thread DØ A* L close (open) DrillØ** $/Fitting $/Swage M  
3340 M 1/8" 1/4-28 5/8" 1-1/4" 7-1/2" (10-1/2") 5/16" $24.26 $6.25  
3341 M 3/16" 1/4-28 5/8" 1-1/4" 8" (11") 5/16" $27.14 $6.25  
3342 M 1/4" 5/16-24 5/8" 2-7/8" 10-1/4" (14") 3/8" $41.84 $6.25  
3343 C 1/8" 1/4-28 5/8" 1-1/4" 8-1/4" (11-1/4") 5/16" $26.88 N/A  
3344 C 3/16" 1/4-28 5/8" 1-1/4" 8-1/2" (11-1/2") 5/16" $29.77 N/A  
  Contractor discounts available
M=Machine Swage, C=CableCrimp™ Hand Swage

  *Longer shaft lengths available.
**Ball can be slightly recessed into post by counterboring with 9/16" drill.

DrillØ is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; so, please call our sales department at 1-800/888-2418 to confirm proper hole sizes.