print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Fittings : Sleekline Cap End Turnbuckle

Sleekline Cap End Turnbuckle


Inserts through drill holes in end post and attaches with screw-on end cap. Use beveled washer for angled connections (#3793, sold separately; see nuts & bolts). Typically paired with a Fixed Cap End or another Sleekline Cap End Turnbuckle.

Sleekline turnbuckles are best suited for attaching to the cable in the field using the CableCrimp™ style fittings and a CableCrimp™ Crimper tool. See Sleekline_Install.pdf for instructions to assemble the Sleekline series of fittings.

Sleekline Cap End Turnbuckle
  Retail Prices (01/01/08)  
Part# Swage CableØ CØ A close SØ L close (open) DrillØ $/Fitting $/Swage M  
3300 M 1/8" 9/16" 3-1/2" 1/4" 8-1/4" (9-7/8") 5/16" $38.33 $6.25  
3302 M 3/16" 9/16" 3-1/2" 1/4" 8-1/4" (9-7/8") 5/16" $38.85 $6.25  
3305 C 1/8" 9/16" 3-1/2" 1/4" 8-1/4" (9-7/8") 5/16" $39.38 N/A  
3282 C 3/16" 9/16" 3-1/2" 1/4" 8-1/4" (9-7/8") 5/16" $39.90 N/A  
  Contractor discounts available
M=Machine Swage, C=CableCrimp™ Hand Swage


DrillØ is the recommended drill hole size for attaching fittings to end termination posts. Drill hole diameters for the intermediate posts may be different than the fitting termination posts; so, please call our sales department at 1-800/888-2418 to confirm proper hole sizes. Also see the Recommended Drill Hole Charts.