print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Fittings : Cap End Turnbuckle

Cap End Turnbuckle


Inserts through drill holes in end post and attaches with small screw-on end cap. Use beveled washer for angled connections (#3793, sold separately; see nuts & bolts). Typically paired with Fixed Cap End or another Cap End Turnbuckle.
Cap End Turnbuckle
  Retail Prices (01/01/08)  
Part# Swage CableØ Thread CØ A* close L close (open) DrillØ $/Fitting $/Swage M  
3325 M 1/8" 1/4-28 9/16" 1-3/8" 7-3/4" (10-3/4") 5/16" $22.68 $6.25  
3326 M 3/16" 1/4-28 9/16" 1-3/8" 8-1/4" (11-1/4") 5/16" $25.57 $6.25  
3327 M 1/4" 5/16-24 9/16" 3" 10-1/2" (14-1/4") 3/8" $39.43 $6.25  
3328 C 1/8" 1/4-28 9/16" 1-3/8" 8-1/2" (11-1/2") 5/16" $25.31 N/A  
3329 C 3/16" 1/4-28 9/16" 1-3/8" 8-3/4" (11-3/4") 5/16" $28.19 N/A  
  Contractor discounts available
M=Machine Swage, C=CableCrimp™ Hand Swage

*Longer shaft lengths available.

DrillØ is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; so, please call our sales department at 1-800/888-2418 to confirm proper hole sizes.