print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Fittings : Fixed Ball End

Fixed Ball End


Inserts through a drill hole or slot in the end post and secures with a screw-on ball. Ball pivots to allow angled connections without beveled washers. Typically paired with Ball End Turnbuckle or Sleekline Ball End Turnbuckle.
Fixed Ball End
  Retail Prices (01/01/08)  
Part# Swage CableØ Thread DØ L *DrillØ $/Fitting $/Swage M  
3352 M 1/8" 1/4-28RH 5/8" 1-1/4" 5/16" $11.03 $6.25  
3353 M 3/16" 1/4-28RH 5/8" 1-3/4" 3/8" $12.60 $6.25  
3354 M 1/4" 5/16-24RH 5/8" 2" 7/16" $19.85 $6.25  
3355 C 1/8" 1/4-28RH 5/8" 1-7/8" 5/16" $14.70 N/A  
3356 C 3/16" 1/4-28RH 5/8" 2-1/4" 3/8" $16.28 N/A  
  Contractor discounts available
M=Machine Swage, C=CableCrimp™ Hand Swage

*Ball can be slightly recessed into the post by counterboring with a 9/16" drill.

DrillØ is the recommended drill hole size for attaching fittings to end posts.
Drill hole diameters for the intermediate posts may be different than the fitting attachment posts;
so, please call our sales department at 1-800/888-2418 to confirm proper hole sizes.