print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Fittings : Internal Thread Adjuster

Internal Thread Adjuster


Inserts through drill holes in end post and attaches with pan head bolt and washer (included). Bolts are square drive, see chart below for size of driver. Use beveled washer (#3791, sold separately; see nuts & bolts) for angled connections such as stairs. Typically paired with another Internal Thread Adjuster.
Internal Thread Adjuster
  Retail Prices (04/01/10)  
Part# Swage CableØ Thread Square Drive# WØ L close (open) SBØ DrillØ $/Fitting $/Swage M  
3266-1.5 M 1/8" 10-24RH #2 7/16" 2-3/4" (3-3/4") 1/4" 5/16" $14.10 $6.25  
3266-2 M 1/8" 10-24RH #2 7/16" 3-1/4" (4-1/4") 1/4" 5/16" $14.25 $6.25  
3266-3 M 1/8" 10-24RH #2 7/16" 4-1/4" (5-1/4") 1/4" 5/16" $14.50 $6.25  
3267-1.5 M 3/16" 1/4-20RH #3 11/16" 3-1/4" (4-1/4") 11/32" 3/8" $18.50 $6.25  
3267-2 M 3/16" 1/4-20RH #3 11/16" 3-3/4" (4-3/4") 11/32" 3/8" $18.65 $6.25  
3267-3 M 3/16" 1/4-20RH #3 11/16" 4-3/4" (5-3/4") 11/32" 3/8" $18.90 $6.25  
   
M=Machine Swage, C=CableCrimp™ Hand Swage


DrillØ is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; so, please call our sales department at 1-800/888-2418 to confirm proper hole sizes.