print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Fittings : Jaw Turnbuckle

Jaw Turnbuckle


Attaches to fixed eyebolts, eyelets, or drilled tabs using a removable clevis pin. 180° pivoting makes these ideal for angled connections. Typically paired with Fixed Jaw End or another Jaw Turnbuckle.
Jaw Turnbuckle
  Retail Prices (04/01/10)  
Part# Swage CableØ Thread PinØ G L close (open) Pin DrillØ $/Fitting $/Swage M  
3270 M 1/8" 1/4-28 1/4" 5/16" 7-3/4" (10-3/4") 5/16" $28.80 $6.25  
3271 M 3/16" 1/4-28 1/4" 5/16" 8-1/4" (11-1/4") 5/16" $30.35 $6.25  
3332 M 1/4" 5/16-24 5/16" 3/8" 9-1/4" (13") 3/8" $42.10 $6.25  
3268 C 1/8" 1/4-28 1/4" 5/16" 8-1/2" (11-1/2") 5/16" $34.15 N/A  
3269 C 3/16" 1/4-28 1/4" 5/16" 8-3/4" (11-3/4") 5/16" $35.15 N/A  
   
M=Machine Swage, C=CableCrimp™ Hand Swage


Pin DrillØ is the recommended drill hole size for attaching fittings to eyelets or drilled tabs on the end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; so, please call our sales department at 1-800/888-2418 to confirm proper hole sizes.