print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Fittings : Sleekline Jaw Turnbuckle

Sleekline Jaw Turnbuckle


Attaches to eyebolts, eyelets, or drilled tabs using removable clevis pin. 180° pivoting is ideal for angled connections. Typically paired with Fixed Jaw End or another Sleekline Jaw Turnbuckle.

Sleekline turnbuckles are best suited for attaching to the cable in the field using the CableCrimp™ style fittings and a CableCrimp™ Crimper tool. See Sleekline_Install.pdf for instructions to assemble the Sleekline series of fittings.

Sleekline Jaw Turnbuckle
  Retail Prices (01/01/08)  
Part# Swage CableØ PinØ TL G SØ L close (open) Pin DrillØ $/Fitting $/Swage M  
3295 M 1/8" 1/4" 15/16" 5/16" 1/4" 6-3/8" (8") 5/16" $37.80 $6.25  
3296 M 3/16" 1/4" 15/16" 5/16" 1/4" 6-3/8" (8") 5/16" $38.33 $6.25  
3297 C 1/8" 1/4" 15/16" 5/16" 1/4" 6-3/8" (8") 5/16" $38.85 N/A  
3299 C 3/16" 1/4" 15/16" 5/16" 1/4" 6-3/8" (8") 5/16" $39.38 N/A  
  Contractor discounts available
M=Machine Swage, C=CableCrimp™ Hand Swage


Pin DrillØ is the recommended drill hole size for attaching fittings to eyelets or drilled tabs on the end termination posts. Drill hole diameters for the intermediate posts will be different than the fitting termination posts; so, please call our sales department at 1-800/888-2418 to confirm proper hole sizes. Also see the Recommended Drill Hole Charts.