print this page Send this page to the printer   Back to the site

    Custom Cable & Hardware : Nuts & Bolts

It's The Little Items That Make All The Difference



The following nuts, bolts, washers and caps are used to secure the cable fittings and provide just the right finished detail to your assemblies.

Washer Nuts

New! Snug-Grip™ Washer Nuts

(stainless 316)
For attaching and tensioning Threaded Terminals. Special raised lip allows both Colored and Stainless End Caps to securely snap-on. It's a flat washer, hex nut and retaining washer all wrapped into one. Special Snug Grip™ threads help prevent loosening.
  Retail Prices
(1/1/08)		  
Part # Terminal Size Thread $/Each  
3370 1/8" & 3/16" 1/4-20RH $2.35  
3371 1/4" 5/16-24RH $2.50  
  Contractor discounts available


Hex Nuts

(stainless 316)
Option for attaching and tensioning Threaded Terminals. Use a Cap Nut to lock and finish.
  Retail Prices
(1/1/08)		  
Part # Terminal Size Thread $/Each  
3143 1/8" & 3/16" 1/4-20RH $0.66  
3178 1/8" & 3/16" 1/4-28RH $0.66  
3243 1/8" & 3/16" 1/4-28LH $1.00  
3244 1/4" 5/16-24RH $0.78  
3242 1/4" 5/16-24LH $1.10  
  Contractor discounts available


Nylon Insert Locknuts

(stainless 316)
Option for attaching and tensioning Threaded Terminals. Replaces the Hex & Cap Nuts and is typically used with a Retaining Washer and Colored End Cap.
  Retail Prices
(1/1/08)		  
Part # Terminal Size Thread $/Each  
3121 1/8" & 3/16" 1/4-20RH $0.71  
3175 1/8" & 3/16" 1/4-28RH $0.71  
  Contractor discounts available


Cap Nuts

(stainless 316)
For locking and providing a finished detail to Threaded Terminals when using Hex Nuts.
  Retail Prices
(1/1/08)		  
Part # Terminal Size Thread $/Each  
3144 1/8" & 3/16" 1/4-20RH $1.05  
3179 1/8" & 3/16" 1/4-28RH $1.16  
3188 1/4" 5/16-24RH $2.63  
  Contractor discounts available




Hex Head Lag Screw

(stainless 18-8)
For attaching Surface Mount Fittings to wood posts or frames.
  Retail Prices
(1/1/08)		  
Part # Thread Shank $/Each  
3183 1/4" screw 2" $1.93  
  Contractor discounts available


Hex Head Bolt

(stainless 316)
For attaching Surface Mount Fittings to metal posts. Drill and tap posts for 1/4-20RH threads.
  Retail Prices
(1/1/08)		  
Part # Thread Shank $/Each  
3322 1/4-20RH 3/4" $1.16  
  Contractor discounts available

Protector Sleeves

(stainless 302/304)
For protecting drill holes in corner and stair transition posts from cable wear (wood posts only).
  Retail Prices
(1/1/08)		  
Part # Description $/Each  
3210 1/4" OD x 7/8" long
for 1/8" & 3/16" cable only		 $0.95  
  Contractor discounts available

Shoulder Eyebolt

(stainless 316)
Attachment option when using Jaw fittings. Includes washer and hex nut.
  Retail Prices
(1/1/08)		  
Part # Thread Shank $/Each  
5057 5/16-18RH 4" $11.29  
  Contractor discounts available


Retaining Washers

(stainless 316)
For attaching Colored End Caps onto the end of Threaded Terminals. The raised lip allows Colored End Caps to securely snap-on (not designed for Stainless End Caps). Typically used in conjunction with a Nylon Insert Locknut.
  Retail Prices
(1/1/08)		  
Part # Terminal size I.D. O.D. $/Each  
7070 1/8" & 3/16" 1/4" 5/8" $0.44  
  Contractor discounts available


Flat Washers

(stainless 316)
Gives extra bearing surface to Threaded Terminals and QuickConnect-SS™ fittings.
  Retail Prices
(1/1/08)		  
Part # Terminal Size I.D. O.D. $/Each  
3180 1/8" & 3/16" 1/4" 11/16" $0.39  
3181 1/8" & 3/16" 1/4" 1" $0.44  
3231 1/4" 5/16" 3/4" $0.44  
3378 1/8" QuickConnect-SS™ 3/8" 1" $0.44  
3177 3/16" & 1/4" QuickConnect-SS™ 9/16" 1" $0.44  
  Contractor discounts available


Flat Washers

(nylon)
Used on Threaded Terminals and QuickConnect-SS™ fittings to protect metal post finishes from abrasion during tensioning.
  Retail Prices
(1/1/08)		  
Part # Terminal Size I.D. O.D. $/Each  
3375 1/8" & 3/16" 1/4" 3/4" $0.34  
3377 1/4" 5/16" 3/4" $0.34  
3376 1/8" QuickConnect-SS™ 3/8" 3/4" $0.34  
3379 3/16" & 1/4" QuickConnect-SS™ 9/16" 3/4" $0.34  
  Contractor discounts available


Beveled Washers

(stainless 316)
For providing a flat bearing surface for Thread Terminals, Internal Thread Adjusters, QuickConnect-SS™ and Cap End fittings on angled terminations.
  Retail Prices
(1/1/08)		  
Part # Terminal Size/End type I.D. O.D. $/Each  
3791 1/8" & 3/16" terminals
& Internal Thread Adjusters		 1/4" 1/2" $4.85  
3799 1/8" & 3/16" terminals 9/32" 3/4" $5.25  
3793 1/4" & Cap End Hardware 5/16" 5/8" $5.05  
3792 1/8" QuickConnect-SS™
& 1/4" Threaded Terminal		 3/8" 3/4" $5.25  
3798 3/16" & 1/4" QuickConnect-SS™ 9/16" 3/4" $5.25  
  Contractor discounts available


Colored End Caps

(Polyethylene)
Detail option for covering and finishing the ends of the QuickConnect-SS™ and Threaded Terminals. With Terminals, either a Snug-Grip™ washer nut or Retaining Washer must be used.
  Retail Prices
(1/1/08)		  
Part # Terminal & QC size O.D. Height Color $/Each  
7071 1/8" & 3/16" 3/4" 7/16" Black $0.48  
7072 1/8" & 3/16" 3/4" 7/16" White $0.48  
7073 1/8" & 3/16" 3/4" 7/16" Brown $0.48  
7074 1/8" & 3/16" 3/4" 7/16" Gray $0.48  
7075 1/8" & 3/16" 3/4" 7/16" Silver $0.48  
7076 1/8" & 3/16" 3/4" 7/16" Taupe $0.48  
7077 1/8" & 3/16" 3/4" 7/16" Bronze $0.48  
7078 1/8" & 3/16" 3/4" 7/16" Green $0.48  
7079 1/8" & 3/16" 3/4" 7/16" Cream $0.48  
  Contractor discounts available

New! Stainless Steel End Caps

(stainless 316)
Decorative option for covering and finishing the ends of the QuickConnect-SS™ and Threaded Terminals. With Terminals, a Snug-Grip™ washer nut must be used.
  Retail Prices
(1/1/08)		  
  Part # Terminal & QC size O.D. Height Style $/Each  
A. 3372 1/8" to 3/16" 3/4" 3/8" Dome $4.75  
B. 3373 1/8" to 3/16" 3/4" 3/8" Crown $4.75  
c. 3374 1/8" to 3/16" 3/4" 3/8" Chamfer $4.75  
  Contractor discounts available